The study of oxazolidone formation from 9,10‐epoxyoctadecane and phenylisocyanate

Abstract

AbstractThe formation of oxazolidone from 9,10‐epoxyoctadecane and phenylisocyanate was studied. One branch of epoxidized vegetable oil with one epoxy group per chain corresponds to 9,10‐epoxyoctadecane. This model could explain the probability of oxazolidone formation from natural oil‐derived epoxides. Epoxidized natural oils are TG consisting of glycerin and three FA with or without one to three epoxy groups in the middle of the chain. To study oxazolidone formation from an internal epoxy group without possible interference from the side reactions on the ester group, 9,10‐epoxyoctadecane was selected as the most appropriate model compound. Epoxy groups in the middle of allong aliphatic chain are of low reactivity toward isocyanates, and preparation of oxazolidones requires fairly harsh conditions such as high temperatures and catalysts, which also promote side reactions. The dominant side reaction is rearrangement of the epoxy groups. We found that the direction and magnitude of the rearrangement and the yield of any particular product depended on the catalyst used. Lithium chloride, aluminum trichloride, and zinc iodide catalyzed oxazolidone formation, along with the catalysis of side reactions such as ketone and carbonate formation. Aluminum trichloride showed the highest conversion of 9,10‐epoxyoctadecane to oxazolidone. Aluminum triisopropoxide, triphenylantimony iodide, and imidazole did not catalyze the formation of oxazolidone. They were effective as catalysts of epoxy group rearrangement and promoted the formation of hydroxyl, ketone, and carbonate compounds. Hydroxyl groups reacted with isocyanate to produce urethane.