The study of flow separation control by a nanosecond pulse discharge actuator

Abstract

The basic dynamic characteristic of a nanosecond (NS) pulse discharge actuator in still air is investigated, which introduces viscid and inviscid effects to the flow, namely, heated air and pressure waves, respectively. The efficacy of a dielectric barrier discharge plasma actuator driven by a nanosecond pulse for active flow separation control is investigated experimentally on a NASA SC(2)-0712 aerofoil at Re=0.5×106 (25m/s). The pressure distribution on the aerofoil surface is measured, and the result indicates that the separation is well controlled at a high angle of attack. The PIV test result shows that the forcing frequency selectively affects the flow over the aerofoil, and a higher forcing frequency has a better influence on the leading edge shear layer. Schlieren imaging experiments at Re=0.1×106 (5m/s) show that the main disturbance factor for the nanosecond pulse plasma actuator is the heating effect, which changes the local temperature and density and induces several vortex structures. The vortex structures entrain the outer high-momentum fluid into the shear layer, thereby strengthening the mixing of the shear layer with the main flow and delaying separation or even reattaching a separated flow. The research reveals the major disturbance factor introduced by NS discharge applied to flow separation control. Furthermore, the spatiotemporal disturbance process induced by the pulse discharge is investigated.