Abstract

The formation of dust was studied when plasma arc heating of galvanized steel in argon atmosphere at amperage from 170 – 190 A, argon consumption – 0.06 m 3 /h, pressure in the furnace – 0.1 MPa. It was found that zinc is almost completely evaporated during the first 30 seconds of melting. The structure of collected zinc containing dust is not homogenous; there are particles of different shapes (spherical, needle, spherical and filmy), sizes and composition. The elemental composition of individual particles of formed dust was analyzed at iCAP 6300 spectrometer (Thermo Electron, USA), on the basis of which their oxide composition was evaluated using TERRA program. It was shown that the dust is composed of particles, consisting of ZnO, Fe 3 O 4 , pure iron and carbon. Based on the results of the work it was concluded that during plasma-smelting of galvanized steel zinc containing dust can be traped separately from the remaining dust in the initial period of melting.

Highlights

  • В связи с увеличением потребления цинка и свинца все большее предпочтение отдается разработкам ресурсосберегающих технологий извлечения их из вторичного сырья.

  • Это необходимо для селективного извлечения цинка или обогащенного цинком продукта в процессе их образования, что при дальнейшей переработке позволит извлечь цинк с меньшими затратами.

  • Целью работы является изучение процесса испарения цинка, а также состава и структуры пыли, образующейся при дуговом нагреве оцинкованной стали.

Read more

Summary

Introduction

В связи с увеличением потребления цинка и свинца все большее предпочтение отдается разработкам ресурсосберегающих технологий извлечения их из вторичного сырья. Это необходимо для селективного извлечения цинка или обогащенного цинком продукта в процессе их образования, что при дальнейшей переработке позволит извлечь цинк с меньшими затратами. Целью работы является изучение процесса испарения цинка, а также состава и структуры пыли, образующейся при дуговом нагреве оцинкованной стали.

Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.