Abstract
Friction, wear and mechanical properties of the liquid phase sintered W-2Ni-1Fe (wt%) alloy were investigated. Tribological tests were carried out at different loads, frequencies and sliding distances under reciprocative sliding condition, against tungsten carbide (WC-Co) counter body. Co-efficient of friction (COF), wear volume and specific wear rate were determined. The dominant operative wear mechanisms were identified in different testing conditions. Abrasive wear and tribo-chemical wear mechanisms were found to be the dominant wear mechanisms. Room temperature strain rate sensitivity was determined by conducting jump test in tensile mode. The alloy showed low strain rate sensitivity with significant strain hardening. High resolution nanoindention mapping was carried out to establish structure property correlations at the micro-meter length scale. The hardness and elastic modulus maps were generated to determine the hardness and elastic modulus of the constituent phases of W and of γ-Ni matrix. The maps were found to correlate well with the actual microstructure obtained from opticaland electron microscopy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Refractory Metals and Hard Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
