The Structure Dissection of Compacted CeO2/La2O3 Laminates by Spatially Offset Raman Spectroscopy

Abstract

ABSTRACTTo tackle the challenge of non‐destructively analyzing complex oxide layers formed by atmospheric corrosion on active metals, we investigate the potential of inverse spatially offset Raman spectroscopy (inverse‐SORS) to detect corrosion products and elucidate how the spectroscopic features of SORS vary. This study explores the utilization of inverse‐SORS technology for longitudinal structural analysis of opaque CeO2/La2O3 laminates, which serve as a proxy for corrosion products. Through a combination of experimental measurements and Monte Carlo simulation, it demonstrates the feasibility of inverse‐SORS in non‐destructively elucidating the layered structure of these laminates. With increasing the spatial offset of this technology, the Raman intensity ratio of La2O3‐to‐CeO2 increases from 0.23 to 3.2 and then decreases to 0.27 for the CeO2/La2O3 sample with a 34‐μm‐thick CeO2 layer under 532‐nm excitation, whereas the bottom La2O3 layer is hardly detected when the thickness of the upper La2O3 layer increases to 225 μm. The results reveal that a thinner CeO2 layer facilitates the escape and detection of Raman signals originating from the bottom La2O3 layer, leading to an enhanced La2O3‐to‐CeO2 signal ratio and a reduced offset at the characteristic peak. The research also sheds light on the intricate interplay among multiple variables, such as spatial offset, laser wavelength, the corresponding absorption factor, the thickness of the oxide layer, and the compactness. These insights suggest that SORS is a valuable and non‐destructive approach for dissecting the structures of highly turbid composites of metallic compounds and semi‐quantitatively deducing their thickness.