Abstract
Abstract In the study the lift-off, blow-out and blow-off stability limits of hydrogen/propane flames and hydrogen/carbon dioxide flames were tested in three different mixing arrangements. The first was to premix hydrogen with carbon dioxide or propane to form a jet flame. The second was to add the gas as an annular jet around the hydrogen flame. The third was to inject into the centre of the hydrogen flame. Propane and carbon dioxide have the same density but create very different chemical kinetic changes when added to hydrogen flames. The results showed that when premixed with hydrogen, propane is more effective in flame lift-off and blow-out. The analysis of kinetic mechanisms revealed that the propane is the dominating fuel in determining the burning rate of the hydrogen/propane while carbon dioxide mainly acted to dilute the hydrogen/CO 2 mixture. Comparing the three mixing arrangements, the experiments showed that hydrogen flame can be effectively lifted or blown out when gases were in annular flow around the hydrogen flame. The isothermal mixing process of the co-flow configuration was discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
