Abstract

The paper presents the results of a fundamental experimental and theoretical study of Darrieus–Landau, thermo-diffusive, instabilities in atmospheric explosions, and, on a smaller scale, in laboratory explosions in closed vessels. Pressure dependencies were sought to exploit the leading role of the Peclet number in the phenomena, so that similar Peclet numbers were achieved in both instances. However, in large atmospheric explosions large Peclet numbers were achieved by the size of the fireball, whereas in the closed vessel explosion it was achieved at a higher pressure by a much smaller flame, but because of the higher pressure, one endowed with a small laminar flame thickness. This study covers a much wider range of fuels and of pressures and the dependencies of the phenomena on both of these were carefully studied, although, for the atmospheric explosions, the data only covered propane and methane. The roles of both Markstein and Peclet numbers become clear and give rise to a more fundamental correlating parameter, a critical Karlovitz number, Kcl, for flame stability. This is based on the flame stretch rate, normalised by its multiplication by the chemical reaction time in a laminar flame. The experimentally measured dependencies of this key parameter on pressure and Markstein number are reported for the first time for so many different fuels. The critical Karlovitz number for flame stability decreases with increase in the strain rate Markstein number. As a result, it is possible to predict the extent of the unstable regime for laminar flames as a function of Masr and pressure. Such data can be used to estimate the severity of large scale atmospheric explosions. As Masr becomes highly negative, the regime of stability is markedly reduced.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.