Abstract
AlN thin films have been sputtered on top of the on-axis and 4° off-axis 3C-SiC (111)/Si (111) substrates at various substrate temperatures. The grazing angle incident XRD scans show that all films have major peak at (002) plane and minor peaks at (101) and (102) planes. The AlN films are further characterized in terms of the FWHM of the rocking curve, surface morphology and deposition rate. We observed that the increasing substrate temperature improve the crystal quality of the AlN (002) films, but it has minimal impact on the surface roughness and deposition rate. We also extracted the values for the bi-axial stress, the grain size and the piezoelectric coefficient. Overall, the off-axis 3C-SiC/Si (111) substrates provide a better template for the sputtering of AlN (002) films in term of better crystal quality, lower surface roughness and lower bi-axial stress.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.