The Splitter Blade Pump–Turbine in Pump Mode: The Hump Characteristic and Hysteresis Effect Flow Mechanism

Abstract

This study focuses on the splitter blade pump–turbine as the research object to analyze the problems of hump characteristics and the hysteresis effect. We simulated the operation of the pump condition with small opening of the guide vane, analyzed the hydraulic loss by using the entropy production theory and entropy wall function, and investigated the study of internal flow transfer characteristics. In this paper, it was first verified that the maximum error of the energy loss calculated by the pressure method and the entropy production method was less than 6% for the working zone. From the quantified energy loss results, a significant instability feature was observed in the 0.65 QBEP–0.9 QBEP operating interval, accompanied by the phenomenon of the non-overlapping of the characteristic curves. The results show that the hump characteristic with hysteresis effect also exists in the splitter blade pump–turbine. The percentage of energy loss in the hump zone is in descending order of runner, guide vanes, spiral casing, and draft tube, but this changes again at low flow rates. By analyzing the high-entropy production region, it was found that the high-hydraulic-loss region is mainly distributed at the trailing edge of the long blade in the vane-less space, which is different from the traditional runner.