The Spatial Development Characteristics of High-Pressure Methane Jet Impinging on Methane Lean-Burn Premixed Flame

Abstract

This work investigated the effect of high-pressure (10 MPa) methane gas jet impinging on the methane lean-burn premixed flame (equivalent ratio of 0.7) based on a three-dimensional numerical simulation by CONVERGE software. The results show that laminar premixed flame is accelerated to develop into a stable turbulent flame under the action of the methane jet, the whole process of flame front development is divided into three stages: laminar (Reynolds number maintains stable, 1–1.3 ms), transition (Reynolds number shows an increasing trend, 1.4–8 ms), and turbulent (Reynolds number tends to stabilize at a high value, 1.9–3 ms). The effect of high-pressure jet on flame development along jet direction (Z axis) is greater than that on vertical direction (Y axis). During turbulence stage, the momentum and kinetic energy of Z axis are 2.7 and 6.3 times greater than that of Y axis, respectively. The high-pressure methane jet causes a change in heat distribution, resulting in local flameout. The rate of change in the local flameout area is greater than that in the flame area, causing a temperature drop in Z axis. This temperature drop increases with the increase in equivalence ratio and with the decrease in distance between cross-section position and ignition center.