The Slide Hammer Seeder: A Novel Tool for Planting Small Seeds

Abstract

Many important herbs [e.g., mint (Mentha sp.), thyme (Thymus sp.)], underused and nutritious vegetables [e.g., purslane (Portulaca oleracea), amaranth (Amaranthus tricolor)], and important biological control plants [e.g., sweet alyssum (Lobularia maritima)] have small seeds (≤ 1.5-mm long) that are difficult to plant with raw (i.e., nonpelleted) seed using existing seeders. A novel tool known as the slide hammer (SH) seeder was developed for the precise seeding of raw seeds of small-seeded plants. The SH seeder is a jab-type planter made primarily from electrical conduit tubing and other materials that are inexpensive and readily available in a hardware store or on the Internet. The interchangeable seed hopper is made from a plastic snap cap vial that has one or more holes of varying diameter depending on the desired seeding rate and seed size. Seed forms a “bridge” above the hole in the vial until they are dislodged from the force of the SH that discharges seeds to fall to the soil. Detailed plans are provided for how to make and use the SH seeder. The fabrication time is 2 to 4 hours with a material cost of ≈$32. I determined the seed vial hole specifications for the precise seeding of a variety of small-seeded plants, including chives (Allium schoenoprasum), chinese chives (Allium tuberosum), basil (Ocimum basilicum), grain amaranth (Amaranthus sp.), sweet alyssum, purslane, creeping thyme (Thymus serpyllum), and spearmint (Mentha spicata) that ranged in size from ≈200 to 11,000 seeds per gram. The diameter of the hole that was suitable for discharging the seed from the vial was always larger than the average seed length, and the ratio of hole diameter to seed length ranged from 1.07 to 1.62. Seeding rate uniformity evaluations were conducted for these species using vials with one vs. two holes and showed that the seeding rate was higher by an average of 58% to 173% from a vial with two holes compared with one hole. For most plant species evaluated, the SH seeder was able to dispense as few as one to three seeds consistently. Seed discharge increased somewhat with increasing SH weight for all species evaluated. The SH seeder can be useful for interplanting sweet alyssum as an insectary plant for aphid (Aphidoidea) control between existing plants of organic lettuce (Lactuca sativa), and for intercropping cultivars of purslane as a novel vegetable in between transplanted organic broccoli (Brassica oleracea Italica group) plants. This novel seeding tool has many potential uses for direct, hand seeding in vegetable and herb production systems and in weed research trials. The seeder could be automated and made with a variety of alternative materials.