Abstract
We discuss the design and performance of a 2 to 4 nm FEL operating in Self-Amplified Spontaneous Emission (SASE), using a photoinjector to produce the electron beam, and the SLAC linac to accelerate it to an energy of about 7 GeV. Longitudinal bunch compression is used to increase the peak current to 2.5 kA, while reducing the bunch length to about 40 μm. The FEL field gain length is about 6 m, and the saturation length is about 60 m. The saturated output power is about 10 GW, corresponding to about 10 14 photons in a single pulse in a bandwidth of about 0.1%, with a pulse duration of 0.16 ps. Length compression, emittance control, phase stability, FEL design criteria, and parameter tolerances are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.