Abstract
Under working conditions, the conductive rods in the GIS flow through the power frequency alternating current. Due to the coupling effect of the magnetic field and electric field between the metal aluminum shell and the conductive rod, induced eddy currents are generated in the metal shell of the GIS. The heat generated by the current heating effect of the GIS conductive rod and the eddy current loss of the metal casing will cause the temperature rise of GIS equipment. Due to the limited volume, the heat dissipation capacity of GIS is poor. Excessive temperature rise will accelerate the insulation aging of GIS equipment, and even damage its insulation, which will affect safe operation. In order to obtain the temperature change law of GIS, related influencing factors such as eddy current loss, skin effect, proximity effect, convective heat transfer of SF6 gas, and gravity of SF6 gas are comprehensively considered. The finite element analysis is used to research and discuss GIS magnetic field distribution, eddy current, temperature distribution and SF6 gas velocity. The initial value of the temperature of each part is set to 293.15 K (20 °C), and the temperature in the GIS is calculated to gradually decrease from the inside to the outside under the rated AC current of 3150 A. The temperature at the conductive rod position is the highest at 335.32 K, and the temperature at the housing position is the lowest at 294.65 K.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
