The Shear Capacity Calculation of Steel Reinforcement High-Strength Concrete Short Columns Restrained with FRP

Abstract

This article aims to study the calculation for shear capacity of SRHC (Steel Reinforced High-Strength Concrete) members restrained with CFS (Carbon Fiber Sheet). Experimental study, theoretical analysis and calculation simulating are integrated in this article for the research of the shear failure characteristics and effect of various parameters on their behavior of SRHC members restrained with SFC on the basis of existed SRHC members tested results. The shear strength formula of steel reinforcement high-strength concrete short columns restrained with CFS is put forward, which based on the superposed strength method. This method on the basis of the load-deformation process of CFS is similar to hooping. The results indicate that the shear capacity of SRHC columns restrained with CFS is higher than SRHC columns. And, due to the axial compression ratio, shear span ratio and the amount of reinforcement influence the shear capacity of the FRP materials. So, these three kinds of factors are also the influencing factors of shear capacity of SRHC members restrained with CFS. The effect of the internal concrete restrained with CFS is good because of the function of CFS is equal to hooping and the strain of CFS is bigger than the strain of steel, so this simple calculation method is safe , which may be useful for further study and engineering design.