Abstract
ABSTRACTThe Ga0.51In0.49p/GaAs system has better desired property (ΔEC >ΔEV) than the conventional AlGaAs/GaAs system for heterojunction bipolar transistor (HBT) application. However, in the fabrication of HBTs, a precise control of the etch of the epilayer is very important. In this study, CH4/H2 and BCl3/SF6 were used for the reactive ion etch of the Ga0.51In0.49P/GaAs. It is found that the etch rate of Ga0.51In0.49P could be higher than that of GaAs with CH4/H2 gas mixture under appropriate etching conditions. While in the case of BCl3/SF6, the etching rate of GaAs could be much higher than that of the Ga0.51In0.49P. By properly using CH4/H2 and BCl3/SF6, the fabrication of Ga0.51In0.49P-based device using reactive ion etch could be easily achieved.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
