The SEĖ method for determination of behaviour laws for strain rate dependent material: Application to polymer material

Abstract

The need to model fracture in crashworthiness by means of finite element codes is a real challenge for research. Before implementing fracture criteria, an excellent knowledge of the stress and strain states in the material just before the crack appearance is the first condition necessary to ensure the model development. At present, most of the material behaviour laws, for example for steel, are only defined until the maximum force when necking occurs. For polymers, the early occurrence of the diffuse necking leads to an experimental technique in which the speed loading is controlled in real time to maintain a constant strain rate during the test. This technique is not however used, due to technical limitations, for high strain rate behaviour laws. In this paper, the authors propose to use the heterogeneity of the displacement field on the surface of the tensile specimen as an initial condition to identify behaviour laws. The method developed uses the information in all the surface zone of the specimen by using digital image correlation. Stresses, strains and strain rates are then obtained to build a surface behaviour called the SEĖ surface. By cutting it, the experimental behaviour laws for a range of large strains and strain rates are then defined for model identification.