The Scuffing Resistance of WC/C Coated Spiral Bevel Gears

Abstract

One of the main problems with the operation of spiral bevel gears is related to very severe conditions in the contact of the meshing teeth; therefore, lubrication is very difficult, which increases the risk of scuffing occurrence. One of the ways to achieve better scuffing resistance is by the deposition of a low-friction coating on the bevel gears teeth. Gear scuffing tests were performed using a bevel gear test rig designed and manufactured at ITeE-PIB. The authorial bevel gear scuffing test was performed. Specially designed, spiral bevel gears were used for testing. Two material combinations were tested: uncoated pinion - coated wheel and, for reference, both gears without coatings. The a-C:H:W (trade name WC/C) coating of DLC type was deposited on the wheel teeth. A mineral, automotive gear oil of API GL-5 performance level was used for lubrication. It is shown that the resistance to scuffing may be significantly improved when the a-C:H:W coating is deposited on the spiral bevel gear teeth.