Abstract
As an important technology of thick coal seam mining, fully mechanized mining with a large mining height has high mining efficiency. In order to study the roof safety control of large mining height working face, the 122106 working face of Caojiatan coal mine is taken as the engineering background. The numerical simulation method is used to analyze the control ability of roof subsidence when the support strength is 1.2 MPa, 1.4 MPa, 1.6 MPa, 1.8 MPa, 2.0 MPa, and 2.2 MPa. The results show that the support strength of hydraulic support is negatively correlated with roof subsidence. Through theoretical analysis of the mechanical model of the support and surrounding rock under the filling condition, it is shown that the height of the gap between the filling body and roof is the main influencing factor of roof subsidence: the smaller the height of the gap between the filling body and roof, the better the control effect on the roof. Through numerical simulation, the roof subsidence and surface subsidence under different filling rates are analyzed. The results show that when the filling rate increases to 80% the control of roof subsidence achieves better results. Taking production safety and economic benefits into consideration, when the reasonable support strength of the working face is determined to be 2.0 MPa and the filling rate is 80%, the safety control of the working face roof can be ensured.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
