Abstract
AbstractThis paper reports polymer composites′ microstructure and dielectric properties based on an epoxy resin matrix containing different amounts (from 2–10 wt. %) of barium strontium titanate nanoparticles. (Ba,Sr)TiO3 was prepared using the hydrothermal method, showing an average particle size of 100 nm. The composites′ thermal properties and morphology were characterized using thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. Our studies show that the (Ba,Sr)TiO3 nanoparticles were well dispersed in the epoxy resin matrix thanks to controlled silane functionalization. Accordingly, the glass transition temperature (Tg) value of the nanocomposites was found to be 159.0 °C at 10 wt. % (Ba,Sr)TiO3 loading and is higher than the neat epoxy resin Tg (Tg=154.7 °C). Moreover, the dielectric composite properties were investigated comprehensively via a wide range of frequencies from 10 Hz to 100 kHz. The results indicate that (Ba,Sr)TiO3 nanopowders and the surface modifying filler play a crucial role in the significant increase of the dielectric constants, approximately 1.5 times at the optimum added amount (Ba,Sr)TiO3. The limited functionalization of (Ba,Sr)TiO3 nanoparticles by the silane affords to control the nanocomposite dielectric loss. Furthermore, the nanocomposites also exhibited good thermal stability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
