Abstract
Cr 2C 3–NiCr, NiCr, WC–Co and stellite-6 metallic coatings were sprayed on ASTM SA-210 grade A1 steel by the HVOF process. LPG was used as the fuel gas. The porosity measurements were carried out to assess the coating characteristics. Hot corrosion studies were conducted on the uncoated as well as HVOF sprayed specimens after exposure to molten salt at 900 °C under cyclic conditions. The thermo-gravimetric technique was used to establish kinetics of corrosion. XRD, SEM/EDAX and EPMA techniques were used to analyse the corrosion products. All these overlay coatings showed better resistance to hot corrosion as compared to that of uncoated steel. NiCr Coating was found to be most protective followed by Cr 2C 3–NiCr coating. WC–Co coating was least effective to protect the substrate steel. It is concluded that the formation of Cr 2O 3, NiO, NiCr 2O 4, and CoO may contribute to the development of hot corrosion resistance in the coatings. The uncoated steel suffered corrosion in the form of intense spalling and peeling of the scale, which may be due to the formation of unprotective Fe 2O 3 oxide scale.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
