The reversible piezochromic luminescence behavior of carbon dots under a cycle of loading/unloading pressure.

Abstract

Carbon dots (CDs) have gained intensive interest owing to their small size, unique structure, excellent photoluminescence (PL) properties and broad applications. In particular, pressure-triggered irreversible piezochromic behavior of fluorescent CDs was previously reported and attributed to the sp2-sp3 transition in the carbon core or aggregation-induced emission under high pressure. Here, we report the reversible piezochromic behavior of microwave-heating synthesized CDs (named M-CDs) using ethylenediamine and aspartic acid as precursors. Under a loading/unloading cycle, the PL intensity of M-CDs decreased continuously with the pressure increasing from 101 kPa up to 20 GPa, and the maximum emission of M-CDs at 101 kPa (λmax = 550 nm) was slightly blue-shifted to 541 nm at 20 GPa, but when the pressure was released from 20 GPa to normal environmental conditions, both the emission wavelength and the PL intensity of M-CDs returned to their initial states at 101 kPa. The control sample was also synthesized using the same precursors but through a hydrothermal method and thus named H-CDs. Both H-CDs and M-CDs have similar particle sizes, morphology and excitation-dependent PL behavior under 101 kPa; however, H-CDs showed a typical piezochromic behavior with the emission blue-shifted from 518 to 491 nm when the pressure was increased from 101 kPa to 0.97 GPa, and then red-shifted from 491 to 530 nm when the pressure was increased up to 10.53 GPa. This irreversible behavior of H-CDs was accompanied by a 2-fold enhancement of their PL intensity after releasing the pressure. The remarkable different behaviors of M-CDs and H-CDs under a loading/unloading cycle are caused by different interior structures of M-CDs and H-CDs due to different synthetic processes, which is worthy of further research.