The relationship between synsedimentary fault activity and reservoir quality — A case study of the Ek1 formation in the Wang Guantun area, China

Abstract

The activity of synsedimentary faults plays an important role in controlling the distribution of sand bodies in basins and furthermore the porosity and permeability of reservoirs. We have used fault interpretation, the method of image and granularity size analysis, and the seismic pumping effect to investigate the control of the activity of the Kongdong fault on the development degree of the dissolution pores and grain size, further studying the controlling mechanism of the activity of synsedimentary faults on reservoir quality (porosity and permeability). The results showed that the slip rate of synsedimentary faults is one of the main factors in controlling reservoir quality. The slip rate controls the accommodation space and hydrodynamic conditions and it furthermore controls the grain size. The higher the slip rate, the bigger the grain size in the downthrow wall of synsedimentary faults; the seismic pump produced by synsedimentary faults activity also controls the development degree of dissolution pores. The development degree of dissolution pores in the downthrown wall of synsedimentary faults is greater than that in the upthrown wall. Dissolution pores are more developed in areas with a large slip rate of synsedimentary faults. Porosity increases gradually with the increase of plane porosity of dissolution pores, whereas the changes of permeability are not obvious.