Abstract
The aim of this study is to investigate the microstructure and properties of the AlMo laser-alloyed layer induced by high-current pulsed electron beam (HCPEB) irradiation. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were utilized to investigate the microstructures of the modified layer. The microhardness and friction properties were also measured. The microstructural observation shows that HCPEB irradiation led to the formation of a modified layer approximately a dozen microns thick, which was the absence of the pores. It was found that the flower- and strip-like AlMo particles were dissolved to form nano-size particles consisting of Al5Mo (h2), Al12Mo, and Al17Mo4 phase after HCPEB irradiation. Additionally, the slip bands and high-density dislocations were formed in the modified layer. The refined microstructure significantly enhanced the microhardness of the laser-alloyed layer. A quantitative evaluation was conducted to investigate the individual contributions of four strengthening mechanisms to the strength of the modified layer, which indicated that dislocation and grain boundary strengthening were dominant. The results of sliding wear tests show that the modified layer exhibited superior properties compared to the laser alloying layer, which was attributed to the formation of crystal defects, solid solutions, and nanoparticles.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
