The reference spectral noise ratio method to evaluate the seismic response of a site

Abstract

The seismic response of several sites in the Durban area of South Africa has been investigated using a refined version of the spectral ratio (H/V) generated by cultural seismic noise. Two samples of noise separated by an interval of several minutes for the vertical and the two orthogonal horizontal components were taken at each site. Though the two samples differed noticeably in the time as well as in the frequency domain, when the components are considered separately, the ratios of the horizontal to the vertical spectra were very similar for most of the pairs. This similitude was obvious not only in the frequencies of the peaks, but also in the range of amplifications involved. These observations have been used to introduce a refinement to the Nakamura Method. This refinement consists in using as a reference the H/V spectral ratio of a well-known, hard rock site. All the other soft sites of interest are then compared with this standard reference site. This comparison provides valuable information on the frequencies and amplification factors introduced by the critical soft sediments. This refined method will be referred here as the ‘Reference spectral noise ratio’.This method, is compared to a similar one devised to investigate the response of horizontal layers to longitudinal seismic waves, using the ratio of the spectra generated by long- period waves.