Abstract
<p>The recovery of rare earth metals (REMs) from end-of-life products, such as Waste Electrical and Electronic Equipment (WEEE), is drawing great attention as an attractive strategy for promoting the sustainable development. The hydrometallurgical technique of solvent extraction has been reported to be one of the most interesting method to recover REMs. However, when applied to WEEE, this process is challenged by the heterogeneous composition of electronic waste, completely different from other solid matrices, and it still has much rooms of improvements. This study investigated the extraction, stripping and recovery of REMs from a WEEE leaching solution using Versatic 10 as carrier in the organic phase and oxalic acid as stripping agent. A factorial design was carried out to evaluate the simultaneous effects of factors as the feed phase pH and the concentrations of both extractant and organic phase modifier in the extraction process. Cerium, lanthanum and yttrium were extracted at high percentages using 200 mM of Versatic 10, loaded by 100 mM of TBP in kerosene at pH 7. Moreover, 750 mM of oxalic acid successfully stripped and recovered 7.63 and 13.82 mg/kg of lanthanum and yttrium, respectively.</p>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.