Abstract
Abstract Aluminum composites reinforced with carbon-based nano-particles or fibers have been widely studied. Yet, the rate dependence of their properties has been barely reported. In the present study, CNTs-reinforced Al composites with CNTs of two aspect ratios were produced by different powder metallurgy methods, followed by spark plasma sintering and hot extrusion. The mechanical properties and the underlying mechanisms of CNTs-reinforced Al composites at various loading rates were studied, with the aim of exploring the role of CNTs on strengthening, esp. on rate-dependent properties. The mechanical experiments revealed that the addition of CNTs not only increased the strength but also the strain rate sensitivity in comparison with pure Al. It was found that, under dynamic loading, the materials showed an increased strength and elongation-to-failure simultaneously, due to improved strain hardening rates. A careful analysis suggested that the long-range back stress produced at the CNTs-Al interfaces and the geometrically necessary dislocations accumulated due to strain gradient along the interface, mainly contributed to the strain hardening of CNTs/Al composites. A novel microstructure-based model using microscopically non-uniform dispersion of CNTs was proposed to account for the mechanical properties with better prediction than the traditional models. The results might shed some light on understanding metal matrix composites reinforced with nano-particles or fibers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.