Abstract

We use multitemporal analyses based on Synthetic Aperture Radar differential interferometry (DInSAR) to study the slope adjacent to the large Punatsangchhu-I hydropower plant, a concrete gravity dam under construction in Bhutan since 2009. Several slope failures affected the site since 2013, probably as a consequence of toe undercutting of a previously unrecognised active landslide. Our results indicate that downslope displacement, likely related to the natural instability, was already visible in 2007 on various sectors of the entire valley flank. Moreover, the area with active displacements impinging on the dam site has continuously increased in size since 2007 and into 2018, even though stabilization measures have been implemented since 2013. Stabilisation measures currently only focus on a small portion of the slope, however, the unstable area is larger than previously evaluated. Highly damaged rock is present across many areas of the entire valley flank, indicating that the volumes involved may be orders of magnitude higher than the area on which stabilisation efforts have been concentrated after the 2013 failure. The results highlight that satellite-based DInSAR could be systematically used to support decision making processes in the different phases of a complex hydropower project, from the feasibility study, to the dam site selection and construction phase.

Highlights

  • Narrow valleys of deeply incised mountainous ranges represent an ideal set-up for the construction of dams, because they allow the creation of large reservoirs with the minimum structure width

  • We show how the InSAR signal highlights different sectors of the entire valley flank that are affected by cumulative displacements throughout the observation period (Fig. 2)

  • Works at the site began in November 2008, large floods occurred in 2009, in 2013 a large failure occurred on the east-facing slope, centred around the dam axis and the deepest excavations

Read more

Summary

Introduction

Narrow valleys of deeply incised mountainous ranges represent an ideal set-up for the construction of dams, because they allow the creation of large reservoirs with the minimum structure width.

Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call