The pseudo‐single‐phase, base‐catalyzed transmethylation of soybean oil

Abstract

AbstractThe base‐catalyzed transmethylation of soybean oil has been studied under conditions whereby the reaction starts as a single phase, but later becomes two phases as glycerol separates. Methanol/oil molar ratios of 6∶1 were used at 23°C. The catalysts were sodium hydroxide (0.5, 1.0, and 2.0 wt%), potassium hydroxide (1.0 and 1.4 wt%), and sodium methoxide (0.5, 1.0, and 1.35 wt%), all concentrations being with respect to the oil. Oxolane (tetrahydrofuran) was used to form a single reaction phase. The reactions deviated from homogeneous kinetics as glycerol separated, taking with it most of the catalyst. When 1.0 wt% sodium hydroxide was used, the methyl ester content reached 97.5 wt% after 4 h, compared with 85–90 wt% in the two‐phase reaction. Sodium hydroxide (1.0 wt%), sodium methoxide (1.35 wt%), and potassium hydroxide (1.4 wt%) gave similar results, presumably because the same number of moles was used. The ASTM biodiesel specification for chemically bound glycerol was achieved after only 3 min when 2.0 wt% sodium hydroxide was used. However, the standard was not achieved after 4 h when 1.0 wt% sodium hydroxide was used, the MG content being 1.1–1.6 wt%. The use of 2.0 wt% catalyst is commercially impractical.