Abstract
Abstract An in situ polymerization technique was used to develop localized polymers grafted onto the surface of dispersed pristine graphene sheets. A 4-substituted benzoic acid monomer was grafted to the surface of expanded graphene by ‘‘ Direct Friedel–Crafts ” acylation. The chains of poly(e-caprolactam) (PA6) that were grafted on the functionalized graphene (FG) were prepared by in situ polymerization of e-caprolactam in the presence of FG. Nanocomposite fibers with different loadings of FG were melt-spun with a piston spinning machine and a hot-roller drawing machine. FG is evenly distributed in the nanocomposite. A significant mechanical property increase of FG/PA6 nanocomposite is obtained at a low FG loading; e.g., a 65% improvement of tensile strength and a 290% improvement of Young’s modulus compared to a pure PA6 fiber is achieved at a FG loading of 0.1 wt.%. The compatibility of FG and PA6 in the nanocomposite fiber improves the thermal stability of the polymer matrix. This functionalization method paves the way for the facile fabrication of graphene-based nanocomposite fibers without disrupting the primary structures of the graphene.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have