Abstract
This paper describes the impact that process parameters and solid conditions have on the supercritical extraction of oil from Chlorella protothecoides that are grown in heterotrophic conditions. Pressure was tested from 150 to 300bar and temperature from 35 to 70°C. In the harshest conditions, the extraction curve slope was close to the theoretical oil solubility. Mass transfer controlled the global rate. Mechanical or thermal cell wall rupture improved the extraction rate; however, it was dependent on the microalgae humidity. The extraction rate on samples that had over a mass fraction of 30% moisture content was greatly reduced. Cell disruption methods, such as sonication or microwaving, were not useful on the wet biomass because the water created a barrier. External mass transfer improved with flow rate (from 1 to 5gmin−1) but a minimum contact time was required. The optimum was 3gmin−1 (72kgCO2h−1kgbiomass−1). A maximum oil fraction of 210gkg−1 biomass (wo=21%) was achieved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.