Abstract
The process of zinc immersion for Mg-Li alloy is researched in this paper. Through orthogonal experiments, the optimum process parameters are obtained. The microstructure and the composition of the Zn-dipped coating were measured with SEM, XRD, EDS and electrochemical testing. Results show that, the optimum process parameters are: concentration of main salt (ZnSO4) is 40g/L; solution temperature is 60°C; dipping time is 5min. In addition, dipping time is the most influential factor, then is solution temperature, the last is the concentration of main salt.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
