Abstract
Abstract The elastic stiffness constants of HgTe have been obtained from ultrasonic wave velocities measured as a function of hydrostatic pressure up to 15·5 × 108 Pa, which is just below the pressure pt at which the structural transition from zinc blende to cinnabar takes place. The shear constants 1/2(C11 – C12) and C44, which are small even at atmospheric pressure, decrease linearly with pressure up to p t, but do not reach zero; all the shear acoustic mode Grüneisen gammas are negative in the long-wavelength limit. It is concluded that the densification phase transition is associated with collapse under a macroscopic shear which takes place when a modified Born stability criterion that 1/2C11−-C12)/B is 0·17 is reached. At pt the ratio βt/αt, of the bond-bending βt to stretching αt force constants is 0·075. The ionicity is found to increase under pressure towards the Phillips critical value of 0·785; as this happens, the bond-bending force constant β reduces until the crystal can no longer withstand shear. A complete set of third-order elastic constants has been measured; these are discussed in terms of a valence-force-field model and provide further evidence for the weakness of HgTe towards bond bending and shear. These third-order elastic constants are used to obtain the cubic invariants in the Hamiltonian with respect to strain. The small value found for 1/(C 111 + 2C 123−3C 112 supports the hypothesis that the transition involves a large component of shear in 〈110〉 directions on {110} planes; a shear component in 〈001〉 directions is also required. A topotactic scheme is suggested for the structural transition from zinc blende to rock salt or cinnabar which conforms with the pressure effects in the elastic shear constants measured for HgTe.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have