The presence of bisphenol A in the thermal paper in the face of changing European regulations – A comparative global research

Abstract

Bisphenol A (BPA) is used as a color developer in a thermal paper that after a heating process reacts with a leuco dye and changes it to a colored form. Receipts from cash registers are considered as the main source of consumer exposure to bisphenols together with polycarbonates and epoxy resins. Levels of BPA and its possible alternatives were determined in thermal paper samples collected between May 2018 and May 2019 in 22 European and 17 non-European countries on all inhabited continents (220 samples in total, 133 of which were from Europe and 87 from other countries). These measurements were intended to check the level of BPA presence in receipts originating from different countries, especially from Europe in the light of changing regulations restricting its use. The effect of thermal printing on developer content was also analyzed, but no major changes in concentrations of bisphenols were observed during the process. Thus, printed receipts could be used for the determination of bisphenol content. Analysis of receipts from 39 countries has shown that BPA is still the most common compound used around the world with 69% samples containing this color developer. Among other tested bisphenols, BPS was used as a color developer in 20% samples, but it was noted that all samples collected from Japan and the United States of America were found to contain only BPS. Other bisphenols (F, AF, E, and B) considered as possible alternatives for BPA were detected only at trace levels or not detected at all, which showed that they were not used as color developers. The relatively large use of BPS as a BPA substitute is worrying because this compound not only has similar endocrine properties but is also poorly biodegradable. Besides, its relatively high polarity facilitates spreading in the environment.