The Preparation of Aramid Paper and its Properties

Abstract

The meta-aramid fibrids were prepared by precipitation in this paper. The meta-aramid solution dissolved in the solvent system DMAc/LiCl was injected into the high shearing coagulant at room temperature and the mixture of water and N, N-dimethylacetamide(DMAc) was used as coagulant. The shearing rate, viscosity of the solution and the concentration of water in coagulant were the main factors on effecting the formation of fibrids. The meta-aramid fibrid has a gradual weight loss process when the temperature increases from 100°C to 400°C, lower thermal property of meta-aramid fibrid was due to the hydrogen bonding and crystalline structure were broken during dissolving process, however, a flexible and easy dispersing property of meta-aramid fibrid in fluid is due to its amorphous structure, which are very important that the meta-aramid fibrid has a better binding and adhesive property with the aramid short fiber in aramid paper, then yield a high mechanical and insulation property for aramid paper. Then, the properies of aramid paper were investigated. The results indicated that the proportion of meta-aramid fibrid in the aramid paper and the length of shorten aramid fiber are the main factors for affecting the strength and the other properties of aramid paper.