Abstract

Aluminide coatings are widely used on turbine blades due to their excellent oxidation resistance. However, the interdiffusion between these coatings and superalloy substrates can lead to a deterioration of mechanical properties in the coated alloys. In the present study, Ni-Al alloys (Ni-50Al, Ni-40Al, and Ni-30Al), both with and without the addition of 10 at. % Ru, are prepared and used to form diffusion couples with a single crystal superalloy SCA21. After a diffusion process at 1150 ℃ for 100 h, interdiffusion layers with the matrix of β-NiAl or γ ′-Ni3Al form at the diffusion couple interfaces. The formation of L12-ordered Ni3Al phases is found to impede elemental interdiffusion. Consequently, Ni-30Al/SCA21, which exhibits only Ni3Al-based interdiffusion layers, displays the lowest interdiffusion coefficients among the diffusion couples without Ru addition. Furthermore, first-principles studies reveal that the addition of Ru increases the formation energies of point defects and defect clusters involved in elemental interdiffusion in stoichiometric NiAl, Ni-rich NiAl, and Ni3Al phases, particularly when Ru occupies the Al site of Ni3Al phases at high temperatures. The remarkable diffusion barrier effects of Ru in Ni-30Al coatings have the potential to significantly enhance their performance and broaden their application prospects.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call