Abstract
The PLM-2 linear magnetic plasma device is designed for the steady-state hours- long plasma confinement. It is the upgraded PLM plasma device. Its parameters will provide the relevant fusion reactor plasma loads on materials. The machine is designed both for fundamental studies of plasma-surface interactions under conditions of high heat and particle fluxes, and for the tests of plasma-facing components under realistic plasma conditions in the high-heat-flux facility. The PLM-2 facility is an advanced linear plasma device uniquely capable of producing plasma conditions similar to those expected in the divertors of the fusion reactors such as ITER, fusion neutron source FNS and DEMO under conditions of steady-state operation. In this article, we describe the PLM-2 design parameters. The PLM-2 device has no analogues in Russia; its parameters are similar to those of the most high-power devices in the world, such as the MAGNUM-PSI, and it is going to be built in Moscow at National Research University “MPEI”.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
