Abstract

In the current study, we evaluate the equivalent stiffness of peritubular reinforcement effect (PRE) of porous dentine optimized by the thickness of peritubular dentine (PTD). Few studies to date have evaluated or quantitated the effect of PRE on composite dentine. The miscrostructure of porous dentine is captured by scanning electron microscope images, and then finite element modeling is used to quantitate the deformation and stiffness of the porous dentine structure. By optimizing the radius of PTD and dentine tubule (DT), the proposed FE model is able to demonstrate the effect of peritubular reinforcement on porous dentine stiffness. It is concluded that the dentinal equivalent stiffness is reduced and degraded with the increase of the radius of DT (i.e., porosity) in the certain ratio value of Ep/Ei and certain radius of PTD, where Ep is the PTD modulus and Ei is the intertubular dentine modulus. So in order to ensure the whole dentinal equivalent stiffness is not loss, the porosity should get some value while the Ep/Ei is certain. Thus, PTD prevents the stress concentration around DTs and reduces the risk of DTs failure. Mechanically, the overall role of PTD appears to enhance the stiffness of the dentine composite structure. These results provide some new and significant insights into the biological evolution of the optimal design for the porous dentine microstructure. These findings on the biological microstructure design of dentine materials are applicable to other engineering structural designs aimed at increasing the overall structural strength.

Highlights

  • Dentine, as measured by either weight or volume, is the major component in individual teeth and exhibits a complex hierarchical structure with both organic and inorganic components [1]

  • Due to the complicated topological structure of dentine and the uncertainty distribution of dentine tubule (DT), we introduce more than one of its components into an analytical model leads to intractable solutions, methods such as the finite element method (FEM) offer an alternative approach [11,12,13]

  • From the finite element analysis (FEA) results, we found that the existence of the peritubular dentine (PTD) layers have a great effect on both the stress and displacement distribution

Read more

Summary

Introduction

As measured by either weight or volume, is the major component in individual teeth and exhibits a complex hierarchical structure with both organic and inorganic components [1]. Assement of the mechanical properties of dentine, such as strength, fatigue, mastication, caries, and abrasion, provide us with a better understanding how dentine responds to its environment. Mature dentine is composed of approximately 70% mineral (i.e. carbonated apatite), 20% organic materials (primarily type I collagen), and 10% water by weight [2]. One of the most distinct microstructural features in dentine is the tubular network that extend outward from the pulp towards the dentine—enamel junction.

Methods
Results
Discussion
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.