Abstract
The powder preparation, material properties, the cutting characteristics and parameter selection for a nickel base superalloy FGH97 are summarized in this paper. It introduces the influence of various elements on the properties of the alloy, the ideal tool materials is coated cemented carbide tool and PCBN ceramic cutting tool. Generally we can choose the rake angle of 0°~10°, clearance angle of 6°~12°, cutting edge angle of 30°~60°, distortion angle of 0.5°~3°, tool cutting edge inclination angle of-10°~-20°. The optimal parameters for machining superalloy is axial cutting depth (range from 0.15~0.20mm), radial cutting depth (range from 10~20mm), the cutting speed (range from 40~60m/min), feed per tooth (range from 0.08~0.10mm/z).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.