The Performance Analysis of Smartphone-Based Pedestrian Dead Reckoning and Wireless Locating Technology for Indoor Navigation Application

Abstract

Recent developments in smartphone technology have increased user demand for indoors applications. The Global Navigation Satellite System (GNSS) and the Inertial Navigation System (INS) are the two advanced systems for navigation technology. However, it is still difficult for GNSS to provide an accurate and practical navigation solution, especially in environments with little or no signal availability. These failings should be easy to overcome; because of their portability and multiple embedded hardware sensors, smartphones seem well positioned to make pedestrian navigation easy and convenient in any environment. Pedestrian Dead Reckoning (PDR) is one of the most commonly used technologies used for pedestrian navigation, but it is not always accurate because its positioning errors tend to accumulate over time. Therefore, this research introduces a new tool to overcome this failing; a Bluetooth Low-Energy (BLE) beacon can maintain and improve the accuracy of PDR. Moreover, a BLE beacon can be initialized from any user position in an indoor environment. The random and unpredictable positions of pedestrians inevitably result in the degradation of navigation guidance systems’ data. To rectify this problem, we have implemented activity recognition technology to notify the proposed system so as to provide a more accurate heading estimate. This study proposes a Personal Navigation System (PNS) based on this technology; it can estimate navigation solutions in real time and combines the advantages of PDR and Bluetooth positioning technology. A series of experiments were conducted to evaluate the accuracy of the system and the efficacy of our proposed algorithms. Preliminary results show the average relative precision of PDR to be about 2.5%, when using a mobile hand-held device. The error of initial position from 2-D beacon positioning is less than two meters. The proposed system works well without post-processing, and the multi-sensor activity recognition system can determine the placement of the device when it is being carried or used by someone with close to 100% accuracy.