The peierls energy and kink energy in fcc metals*

Abstract

In fcc crystals, dislocations are dissociated on the {111} glide plane into pairs of partial dislocations. Since each partial interacts individually with the Peierls potential and is coupled to its neighbour by a stacking fault, periodic variations in the separation distance d of the partials occur when dislocations running along closed packed lattice directions are displaced. This can drastically reduce the effective Peierls stress. By using the Peierls model the structure of 0°, 30°, 60° and 90° dislocations in a typical fcc metal with the elastic properties of Cu and a stacking-fault energy γ0 in the interval 0.04 ≤ γ0 ≤ 0.05 J/m2 was studied, and the magnitude of the Peierls energy ΔE P and the resulting kink energies E K were determined. Since the energies involved are of the order of 10−3 eV/b or less, their magnitude cannot be asserted with high confidence, considering the simplifying assumptions in the model. The difference in the changes of the core configuration during displacement of dislocations of different orientations should, however, be of physical significance. It is found that a dissociated 60° dislocation generally has a higher effective Peierls energy than a screw dislocation, but the reverse is true for the kink energy, at least in Cu.