The Paleoproterozoic carbonate-hosted Pering Zn–Pb deposit, South Africa: I. Styles of brecciation and mineralization

Abstract

The Pering deposit on the Ghaap Plateau, Northwestern Province, South Africa, was the largest of several Zn–Pb occurrences hosted by Neoarchean platform dolostones of the Transvaal Supergroup. With a Paleoproterozoic mineralization age, these occurrences are widely regarded as the oldest representatives of Mississippi Valley-type Pb–Zn deposits. Hosting an initial resource of 18 Mt at an average grade of 3.6 wt% Zn and 0.6 wt% Pb, the Pering deposit was mined from 1984 until its final closure at the end of November 2002. In this study, available geological and grade distribution maps were evaluated and complemented by the examination of mining-related outcrops, drill core, and a large set of ore and host rock samples. Four different styles of brecciation can be distinguished at the Pering deposit: (1) pyritic rock matrix breccia; (2) chemical wear breccia; (3) mosaic breccia; and (4) crackle breccia. Geological and mineral paragenetic observations on these different breccia types suggest that the formation of the Pering deposit commenced with an initial stage of hydrothermal karstification. Large volumes of pyritic rock matrix breccia formed by wall rock collapsing into the open space attributed to carbonate dissolution. This stage of hydrothermal karstification acted as ground preparation for the subsequent mineralization event. By the upward advance of the hydrothermal karstification process, fluid reservoirs in the previously undisturbed dolostone host rock succession were tapped, ultimately leading to fluid mixing. Hydrothermal sulphides are the most abundant where fluid mixing was most effective, i.e. along the outer and upper margins of the breccia bodies, and in stratabound zones along permeable host rock units. Chemical wear brecciation and formation of large volumes of fine-grained replacive sphalerite mineralization mark the early stage of hydrothermal Zn–Pb mineralization associated with this fluid mixing. The fine-grained stage of sulphide mineralization was succeeded by very coarse-grained open-space-infill mineralization. The latter is very uniform across the entire deposit and typically cements mosaic and crackle breccia, but also fills remaining open space within chemical wear brecciated portions of the deposit.