Abstract
In 3rd revolution industry, additive manufacturing has a role in term manufacturing process for creating a part. Additive manufacturing has popular name that is called 3D printing technology. The surface quality of 3D printed part is still observed and developed. So, the purpose of research is to know the surface quality of 3D printed part to different layer height and orientation of deposit layer in Polylactic Acid material (PLA). The experimental test involved a 3D printer machine to build square 3D printed part. Furthermore, the quality surface of specimen is measured by using SurftestSJ-301 Mitutoyo device. The layer height of the test specimen is varied from 0.05 mm to 0.15 mm with the increment of 0.5 mm for each specimen. The layer angle of deposit material is also varied from 45o to 90o with the increment of 15o for each variation. Base on the observation and analyzation, the highest roughness is on the Lh 0.15 mm (11.79 ) with 45o of layer angle of deposit material, whereas the lowest roughness on the Lh 0.05 mm (0.98 ) with 90o of layer angle of deposit material.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
