Abstract
This paper presents an analytical solution for the one-dimensional acoustic field in a duct with arbitrary mean temperature gradient and mean flow. A wave equation for the pressure perturbation is derived which relies on very few assumptions. An analytical solution for this is derived using an adapted WKB approximation. The solution is a superposition of waves travelling in either direction and thus provides physical insight. It is also very easy to calculate. The proposed solution is applied to ducts with a mean temperature profile which varies axially with (i) a linear and (ii) a partial sine wave profile: predictions are compared to those obtained by numerically solving the linearised Euler equations (LEEs). The analytical solution reproduces the acoustic field very accurately across a wide range of flow conditions which span both low and moderate-to-high subsonic Mach numbers. It always performs well when the frequency exceeds a certain value; when the mean temperature profile is linear, it also performs well to very low frequencies. This increased frequency range for linear mean temperature profiles leads to its application to more complicated profiles in a piecewise linear manner, axially segmenting the temperature profile into regions that can be approximated as linear. The acoustic field is predicted very accurately as long as enough segmentation points are used and the condition for the linear mean temperature profile is satisfied: |k0|>|α|, where k0 is the local wave number when there is no mean flow and α is the normalised mean density gradient. The proposed solution is extensively compared to previous analytical solutions, and is found to be more accurate and reliable, especially at higher Mach numbers. The entropy wave generated by communication between the acoustic waves and the distributed mean temperature zone is calculated using the LEEs. It is found to remain very small across all operating conditions, such that both the entropy wave and its impact on the acoustic field can be neglected.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.