Abstract
AbstractThe development of high‐efficiency, low‐cost, and long‐term stability catalysts for water electrolysis is significant for the sustainable production of hydrogen. The aim of this study is to reduce the overpotential and thus energy consumption. Toward this aim, transition metal sulfide catalyst (marked as S5‐40 doped Ni4Mo) is successfully prepared by a fast one‐step electrodeposition process on a copper foam (CF) substrate. The S20 doped Ni4Mo/CF catalyst displays an exceedingly low overpotential of 140 and −128 mV at 10 mA cm−2 for (oxygen evolution reaction) and (hydrogen evolution reaction), respectively. The S20 doped Ni4Mo/CF can be powered by a commercial AA alkaline battery (1.5 V) in 1.0 m KOH. It shows a lower cell voltage of 1.595 V at 10 mA cm−2 for overall water splitting (OWS). Up to 60 h of stability testing, compared with the S20 doped Ni4Mo/CF catalyst before electrolysis, their performance is improved by 15.5% and 41.1% at 2 and −0.7 V versus reversible hydrogen electrode, respectively. This study offers an avenue to fabricate transition metal sulfide bi‐functional catalysts for OWS and provides deep insights into the relationships among the S‐doping Ni4Mo at the 1.0 m KOH electrolyte physical characterization and electrocatalytic activity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.