Abstract
The electric properties of polymers are increasingly important in a wide range of applications such as sensors, energy storages, microelectronics, and filtration membranes among others. In this work, the effect of multi-energetic Au ion implantation on the graphene oxide (GO), polyimide (PI), polyethylene terephthalate (PET) and polylactide (PLLA) elemental, chemical, structural end electric properties is presented with potential application in 3D metal-dielectric structure synthetization. The three energies, 3.2, 1.6, 0.8 MeV of Au ions with fluence 3.75×1014 cm-2 were used in ascending or descending order to create two sample sets, which were subsequently analysed by RBS, ERDA, EDS and AFM. RBS analysis was used for Au-depth profile characterization in the implanted samples, the profiles agree reasonably with those simulated by SRIM code. Electrical properties were investigated by standard two-point technique with respect to the used parameters of the ion irradiation. The sheet resistance decreases after ion irradiation and it is evident that the ascending order of ion implantation energies has more significant effect on the conductivity enhancement compare to the descending one.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
