Abstract
Biodegradable polylactic acid (PLA) was compounded with thermoplastic polyurethane (TPU) by twin‐screw extrusion at weight ratios of 90/10, 80/20, 70/30, and 60/40. The blends were investigated based on their phase morphology, thermal and mechanical properties, and shape memory properties. The tensile results showed that PLA was successfully toughened by TPU. When the TPU content was 40%, the elongation‐at‐break increased to 400%. The SEM morphology showed that TPU was dispersed uniformly in the PLA matrix; DMA and DSC results indicated that the two polymers were immiscible. Most interestingly, it was found that the blends exhibited a shape memory behavior and, unlike most of the existing shape memory polymers (SMPs), the PLA/TPU blends could be deformed at room temperature without an extra heating and cooling step. During the deformation process, TPU acted as a toughening agent that prevented the PLA/TPU blends from breaking; thus, the temporary shape could be kept and internal stress was stored in the blends. Upon heating to above the glass transition temperature of PLA (about 60°C), the deformed parts regained their original shapes quickly along with the release of the stress. POLYM. ENG. SCI., 55:70–80, 2015. © 2014 Society of Plastics Engineers
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
