The morphological evolution of the axial structure and the curved columnar grain in the weld

Abstract

The competitive growth of microstructures in the entire weld pool for both the Al–Cu alloy and the pure aluminum was simulated by the cellular automata method to comparatively investigate the micro-mechanisms for the morphological evolution of the axial structure and the curved columnar grain in the weld. The competitive mechanism of grains during the epitaxial growth and the morphological evolution of the grain structure in the weld with various welding speeds were studied. The results indicate that both the thermal conditions and the solidification characteristic of the weld metal exert an important influence on the grain competition and the resulting structure in the weld. For the Al–Cu alloy, the dendritic structure with a large S/L interface curvature appears during the epitaxial growth. The preferential orientation affects the competition result obviously. Owing to the anisotropic growth kinetics, the straight axial structure forms at low welding speeds. With the increase of the welding speed, the width of the axial region decreases and eventually disappears. For the pure aluminum, the S/L interface during the epitaxial growth is planar, and the grain competition is controlled by the thermal conditions completely. The columnar grains curve gradually to follow the highest temperature gradient direction at low welding speeds and become straight at high welding speeds.