The Migration Behavior of Atomic Clusters in Early Nanocrystalline Process of Soft Magnetic Finemet Alloy

Abstract

The Finemet alloys are commonly used as cores in transformers and generators, stress and field sensors in technological application for their excellent soft magnetic characteristics. To clarify the nanocrystallization mechanism of Finemet especially about the atomic migration in early stage is very essential for developing their distinctive characteristics. In this study, we investigate the migration behavior of atoms in order to clarify the mechanism of the early-stage nanocrystallization in amorphous Finemet alloys. The Fe(73.5)Si(13.5)B9Nb3Cu1 amorphous ribbons were prepared by single-roller melt-spinning process in argon atmosphere, and then annealed at 350 degrees C-400 degrees C for 10 minutes in vacuum. The atom force microscope (AFM) and the coincidence Doppler broadening spectra (CDB) were used to characterize the migration behavior of different atoms in Fe(73.5)Si(13.5)B9Nb3Cu1 amorphous alloy during the early-stage nanocrystallization. The X-ray diffraction (XRD) patterns show that all annealed samples are in the amorphous state. But the AFM observation shows clearly that there are many small atomic clusters (nuclei) which distribute in the amorphous matrix of the annealed samples. With increasing annealing temperature, there is a significant increase in the amount of atomic clusters and a dramatic drop in the average size of clusters with very limited Cu contention in the samples, which reflect the structural evolution into more homogeneity. The CDB spectrum indicates that the peaks of positron annihilation spectrum are gradually reduced, which means the number of grain boundary and the defects in samples are gradually increased. It can be concluded that more defects are introduced by the formation of atomic clusters through atomic migration during the early-stage nanocrystallization in Fe(73.5)Si(13.5)B9Nb3Cu1 amorphous alloys.