Abstract
Magnesium (Mg)-based composites, as biomaterials, have attracted widespread attention due to their adjustable mechanical properties like elastic modulus, ductility, ultimate tensile strength, and corrosion resistance. In this study, hydroxyapatite (HA) reinforced ZK61 Mg-matrix composites were prepared by powder metallurgy and hot extrusion methods. The influence of the content of HA (10 wt%, 20 wt%, and 30 wt%) on the microstructure, density, mechanical properties, corrosion property and biocompatibility were investigated. The results showed that the density and yield strength of the composites match those of natural bone. Moreover, the composite with 10 % HA (ZK61-10HA) exhibited the best corrosion resistance, as determined by the electrochemical measurement and immersion test in simulated body fluid (SBF) at 37 °C. In addition, the ZK61-10HA composite significantly enhanced the cell viability (≥78 %) compared with ZK61 alloy in vitro testing. It is demonstrated that the mechanical properties, corrosion resistance and biocompatibility of Mg alloy can be effectively controlled by adjusting the content of HA, which suggested that the ZK61-HA composites were promising candidates for degradable implant materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Mechanical Behavior of Biomedical Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
