The mechanism of Fe-rich intermetallic compound formation and growth on inoculants revealed by electron backscattered diffraction and X-ray imaging

Abstract

Fe-rich intermetallics affect critically the mechanical properties and recyclability of aluminium alloys. Increasing effort has been spent on the inoculation of these intermetallics, hoping to promote a finer distribution. Recently Al-5Ti-1B (wt.%), originally developed to refine α-Al, has been shown to refine Al13Fe4, an intermetallic phase present in a variety of Al alloys. However, mechanisms of the formation and growth of the intermetallics on the inoculants are unclear. In this paper, Ti is added to Fe-containing Al alloys to produce a large number of potent Al3Ti particles, the active inoculant in Al-5Ti-1B. We use a combination of electron backscattered diffraction, in situ synchrotron X-ray radiography and post-solidification X-ray computed tomography to investigate the formation and growth of primary Al13Fe4 on Al3Ti inoculants, first in a model Al-Fe alloy, with key insights then confirmed in a high Fe-containing, recycled 6xxx alloy. Crystallographic orientation relationships between Al13Fe4 and Al3Ti are analysed comprehensively, and the formation and growth dynamics of Al13Fe4 on Al3Ti is also unveiled. A strong link is revealed between the formation of Al13Fe4 on Al3Ti and a twinning-related pseudo-symmetry of Al13Fe4. Finally, a potential strategy to refine both intermetallics and α-Al in recycled alloys with elevated Fe concentration is proposed.